Clamp Saddle With Galvanized Bolt & Reinforcing Ring

Pressure Values
Ø 25 mm – Ø 110 mm : PN 16
2” – 2 ½” : PN 10
Ø 125 mm – Ø 225 mm : PN 10
3” – 4” : PN 6
Installation Areas
Urban Potable Water Networks – Landscaping Systems
Agricultural Irrigation – Greenhouses

Clamp Saddle With Galvanized Bolt & Reinforcing Ring
Installation Instructions
Specification
Assembly Methods
Tests

Code	Size	Packing Qantity	Box Qantity
100120201	25 x ½”	25	300
100120301	32 x ½”	25	250
100120302	32 x ¾”	25	250
100120401	40 x ½”	25	200
100120402	40 x ¾”	25	175
100120501	50 x ½”	10	160
100120502	50 x ¾”	10	150
100120503	50 x 1″	10	130
100120601	63 x ½”	10	110
100120602	63 x ¾”	10	110
100120603	63 x 1″	10	100
100120604	63 x 1¼”	10	80
100120605	63 x 1½”	10	80
100120701	75 x ½”	5	90
100120702	75 x ¾”	5	90
100120703	75 x 1″	5	80
100120704	75 x 1¼”	5	55
100120705	75 x 1½”	5	55
100120706	75 x 2″	5	50
100120801	90 x ½”	5	75
100120802	90 x ¾”	5	70
100120803	90 x 1″	5	60
100120804	90 x 1¼”	5	40
100120805	90 x 1½”	5	40
100120806	90 x 2″	5	40
100120901	110 x ½”	5	55
100120902	110 x ¾”	5	55
100120903	110 x 1″	5	50
100120904	110 x 1¼”	5	35
100120905	110 x 1½”	5	35
100120906	110 x 2″	5	30
100121001	125 x ½”	2	44
100121002	125 x ¾”	2	44
100121003	125 x 1″	2	40
100121004	125 x 1¼”	2	40
100121005	125 x 1½”	2	40
100121006	125 x 2″	2	40
100121101	140 x ½”	2	36
100121102	140 x ¾”	2	36
100121103	140 x 1″	2	36
100121104	140 x 1¼”	2	36
100121105	140 x 1½”	2	36
100121106	140 x 2″	2	28
100121201	160 x ½”	2	26
100121202	160 x ¾”	2	26
100121203	160 x 1″	2	26
100121204	160 x 1¼”	2	24
100121205	160 x 1½”	2	24
100121206	160 x 2″	2	22
100121207	160 x 2½”	2	16
100121208	160 x 3″	2	12
100121209	160 x 4″	2	12
100121302	180 x ¾”	2	10
100121303	180 x 1″	2	10
100121304	180 x 1¼”	2	10
100121305	180 x 1½”	2	10
100121306	180 x 2″	2	10
100121307	180 x 2½”	2	10
100121308	180 x 3″	2	10
100121309	180 x 4″	2	8
100121402	200 x ¾”	2	10
100121403	200 x 1″	2	10
100121404	200 x 1¼”	2	10
100121405	200 x 1½”	2	10
100121406	200 x 2″	2	8
100121407	200 x 2½”	2	8
100121408	200 x 3″	2	8
100121409	200 x 4″	2	8
100121503	225 x 1″	2	8
100121504	225 x 1¼”	2	8
100121505	225 x 1½”	2	8
100121506	225 x 2″	2	8
100121507	225 x 2½”	2	8
100121508	225 x 3″	2	8
100121509	225 x 4″	2	8

Clamp saddles should be kept away from hard and sharp objects during the storage and installation. If the installation is laid under the ground, it should be covered with sand to protect it from hard and sharp objects. Any damaged adaptor should not be used absolutely.

The o-ring should be placed in its socket properly in order not to be unsettled during the installation.

Male adaptors to be used with Clamp Saddles, should be wrapped up with the teflon band with the tightening direction and should be wrapped enough to prevent leakage.

Drilling the pipe after the installation of Clamp Saddles can cause the damage of the threads. Thus, drilling must be carried out in a way that it does not touch the threads with a suitable drill bit.

If the dimension of the installed pipes is bigger than the standard values upper and lower parts will not contact each other. Under these circumstances, there is no need to tighten the bolts till the upper and lower body parts contact or hammer the slides to the end point.

Bolts and nuts must be tightened mutually balanced during installation of the Clamp Saddles.