Clamp Saddle With Slide

Pressure Values
Ø 25mm – Ø 225 mm : PN 16
Installation Areas
Urban Potable Water Networks – Landscaping Systems
Agricultural Irrigation – Greenhouses

Clamp Saddle With Slide
Installation Instructions
Specification

Code	Size	Packing Qantity	Box Qantity
9311	25 x ½”	25	300
9321	32 x ½”	25	200
9322	32 x ¾”	25	200
9331	40 x ½”	25	200
9332	40 x ¾”	25	200
9341	50 x ½”	10	90
9342	50 x ¾”	10	90
9343	50 x 1″	10	90
9351	63 x ½”	10	80
9352	63 x ¾”	10	80
9353	63 x 1″	10	80
9361	75 x ½”	5	60
9362	75 x ¾”	5	60
9363	75 x 1″	5	60
9371	90 x ½”	5	45
9372	90 x ¾”	5	45
9373	90 x 1″	5	45
9381	110 x ½”	5	40
9382	110 x ¾”	5	40
9383	110 x 1″	5	40

Clamp saddles should be kept away from hard and sharp objects during the storage and installation. If the installation is laid under the ground, it should be covered with sand to protect it from hard and sharp objects. Any damaged adaptor should not be used absolutely.

The o-ring should be placed in its socket properly in order not to be unsettled during the installation.

Male adaptors which are going to be used with clamp saddles should be wrapped tight enough to prevent leakage towards fastening direction with a teflon band.

Drilling the pipe after the installation of Clamp Saddles can cause the damage of the threads. Thus, drilling must be carried out in a way that it does not touch the threads with a suitable drill bit.

If there is a size difference, larger than the standart dimensions (> 0.5 mm) in the pipe, upper and lower body parts will not contact each other during the clamp saddle installation. In this case, there is no need to drive in the wedges of the clamp saddle up to the end.

During the installation of the clamp saddles, wedges or bolts should be installed reciprocatively.

It has been produced from high quality polypropylene raw material and it has resistance to impact.

It is designed to prevent leakage caused by the size differences of the pipes.

O-rings are made of rubber and provide leakproofness under high pressure.

It does not contain any harmful compounds which can change the taste or the smell of the water.

It is compatible with ISO 13460-1 Standard.