Double Ended Clamp Saddle With Slide
Pressure Values
Ø 25mm – Ø 225 mm : PN 16
Installation Areas
Urban Potable Water Networks – Landscaping Systems
Agricultural Irrigation – Greenhouses
Product Description
- Double Ended Clamp Saddle With Slide
- Installation Instructions
- Specification
| Code | Size | Packing Qantity | Box Qantity |
|---|---|---|---|
| 9411 | 25 x ½” x ½” | 25 | 250 |
| 9421 | 32 x ½” x ½” | 25 | 150 |
| 9422 | 32 x ¾” x ¾” | 25 | 150 |
| 9431 | 40 x ½” x ½” | 25 | 150 |
| 9432 | 40 x ¾” x ¾” | 25 | 150 |
| 9441 | 50 x ½” x ½” | 10 | 80 |
| 9442 | 50 x ¾” x ¾” | 10 | 80 |
| 9443 | 50 x 1″ x 1″ | 10 | 70 |
| 9451 | 63 x ½” x ½” | 10 | 70 |
| 9452 | 63 x ¾” x ¾” | 10 | 70 |
| 9453 | 63 x 1″ x 1″ | 10 | 60 |
| 9461 | 75 x ½” x ½” | 5 | 60 |
| 9462 | 75 x ¾” x ¾” | 5 | 50 |
| 9463 | 75 x 1″ x 1″ | 5 | 50 |
| 9471 | 90 x ½” x ½” | 5 | 45 |
| 9472 | 90 x ¾” x ¾” | 5 | 45 |
| 9473 | 90 x 1″ x 1″ | 5 | 40 |
| 9481 | 110 x ½” x ½” | 5 | 40 |
| 9482 | 110 x ¾” x ¾” | 5 | 40 |
| 9483 | 110 x 1″ x 1″ | 5 | 40 |
Clamp saddles should be kept away from hard and sharp objects during the storage and installation. If the installation is laid under the ground, it should be covered with sand to protect it from hard and sharp objects. Any damaged adaptor should not be used absolutely.
The o-ring should be placed in its socket properly in order not to be unsettled during the installation.
Male adaptors which are going to be used with clamp saddles should be wrapped tight enough to prevent leakage towards fastening direction with a teflon band.
Drilling the pipe after the installation of Clamp Saddles can cause the damage of the threads. Thus, drilling must be carried out in a way that it does not touch the threads with a suitable drill bit.
If there is a size difference, larger than the standart dimensions (> 0.5 mm) in the pipe, upper and lower body parts will not contact each other during the clamp saddle installation. In this case, there is no need to drive in the wedges of the clamp saddle up to the end.
During the installation of the clamp saddles, wedges or bolts should be installed reciprocatively.
It has been produced from high quality polypropylene raw material and it has resistance to impact.
It is designed to prevent leakage caused by the size differences of the pipes.
O-rings are made of rubber and provide leakproofness under high pressure.
It does not contain any harmful compounds which can change the taste or the smell of the water.
It is compatible with ISO 13460-1 Standard.
Contact Information
Monday to Friday 08.00 – 18.00
We have 550 points in 75 countries…
Customer Satisfaction Survey
